BORE GUIDE-GOLD, .17-.25 CAL

รหัสสินค้า : BTBG-0100-00

Description

Bore Tech’s CENTERFIRE, BOLT ACTION BORE GUIDE precisely aligns cleaning rods with the bore & prevents damage to your firearm & cleaning rod. The solvent-resistant, molded rubber nosecones provide a superior seal and prevent bore cleaner from leaking into the chamber and action. Featuring high-quality, CNC machined & injection molded components, the color-coded bore guides fit most bolt action rifles from .17 to .416 calibers.

INSTRUCTIONS

Bore Guide Use Instructions For Centerfire, Bolt Action Bore Guides:

Remove bolt as per manufacturer’s instructions.

Loosen the brass bolt collar handle and slide the rubber nosecone (front end) of the Bore Guide through the receiver until seated in the chamber.

*Lightly push on the Bore Guide to seat rubber nosecone in chamber.

Slide the bolt collar forward until the brass handle is aligned with the bolt handle recess. Rotate the brass handle downward into the bolt handle recess and tighten against the Bore Guide tube. At this point, the guide should not move forward or backwards.

NOTE: On rifles without a bolt handle recess, it may be necessary to remove the brass locking handle and slide the bolt collar forward until the threaded locking handle hole is visible in the ejection port. Reinsert the brass locking handle and tighten against Bore Guide tube to properly lock Bore Guide into action.

Position a dry patch of the proper size on a jag and insert the rod/jag into the rear opening of the bore guide until visible in the solvent port.

Apply cleaner or oil to the patch and push through the bore.

The solvent port may also be used to apply cleaner to brushes.

To remove the Bore Guide from the action, loosen and rotate brass handle up and out of the bolt handle recess. Then pull Bore Guide and bolt collar back away from the chamber and out of the action.

NOTE: For Actions with exposed bolt releases (e.g. Winchester Model 54) loosen the brass handle and leave the bolt collar in position. (The bolt collar depresses the bolt release keeping it from catching on the lip of the rubber nose cone.) While keeping the bolt collar stationary, pull the Bore Guide backwards until rubber nosecone butts up against bolt collar. Then pull both the bolt collar and Bore Guide out together as one assembly.